Consent Preferences
WarningFlammable

S282 油位开关 - 电容型

油位开关,提供水槽和/或油源输出。配有DIN 72585 4针连接器。

S282是一个主动式装置,设计用于在油量低于或高于预设的油量时发出报警信号。它可以指定一个延迟,以消除由于湍流引起的误报。

该开关包含一个工厂可编程的微处理器,可提供沉降至地或源电压输出。它的占地面积小,对水箱的侵入有限,意味着降低了损坏的风险,而且有多种客户指定的选项,使其适用于大多数应用。

为了实现高精度,S282最好是水平安装在需要报警或控制信号的地方。但是,开关也可以垂直安装,请联系Fozmula公司,了解您的应用需求。

Documents
Data Sheet

液体类型

矿物油,通常用于发动机或液压执行器,与黄铜、聚四氟乙烯和FVMQ兼容。

电气等级

Supply voltage: 9-36 VDC.
Supply current: 7 mA + source output.
Max. load current: 1.0 A (sink) or 20 mA (source).
Alarm delay time: 0 to 25 s rising or falling (factory set).
Connection: 4 way DIN 72 585 connector
Power up delay: 0 to 10 s (factory set).
Power up state: ‘In Liquid’ or ‘Out of Liquid’ (factory set).
Output type: Sink (open collector) and/or Source (supply voltage).
Output pin: Pin 3 (sink) or Pin 4 (source).
Output state: Sink Open / Closed in liquid (factory set).
Source On / Off in liquid (factory set).

连接

见下图。

环境评级

Ingress: IP67 (with mating connector fitted).
Max. pressure: 5.0 Bar (72 psi)
Temp. range: -40 °C to +125 °C
Weight: 70 g typical (dependent on thread size)
EMC: ISO13766-1:2018
Vibration (15.3 Grms)
3 orthogonal planes for 3 hours per plane
Testing performed in accordance with BSEN 60068-2-64:1993
Drop test: 1 m to concrete surface.

建设

Body: Brass.
Probe: PTFE.
Terminals: Brass, Tin Plated.
Seals: FVMQ.
Connector: PA66 30% Glass Filled Nylon.

可选配件

C/K2: Mating connector kit to suit harness wire cross sectional area of 1 to 2.5 mm2, insulation diameter 1.2 to 3 mm: Ø1.60 to 2.15 mm. Comprising of: Crimp Terminals (x4), Cable seals (x4) and Connector assembly 4 way (x1).

产品查询 - S282