Consent Preferences
WarningFlammable

7300 Series

Servicio de gas LP para cilindros de levantamiento de horquillas y 3/4 "reemplazos de Rotogauge

Application
Comprised of 3⁄4″ male NPTF Junior gauges designed for use in DOT lift truck cylinders. Also suitable for use in certain recreational vehicle (RV) applications and as a replacement for 3⁄4″ NPT rotary type gauges up to 45″ [114 mm] in diameter.

General Information & Features
Gauges which accept snap-on Junior dials have 1 3⁄8″ [35] hex wrenching flats. Gauges which accept screw-on Junior dials have 2″ [51] hex wrenching flats.

Todos los diales utilizados en estos medidores indican con arco limitado debido a las restricciones de tamaño impuestas en los componentes del medidor que deben pasar a través de una abertura de 3 ⁄ 4 "NPT.

Documents
Data Sheet
DS-996 Installation Instructions
MS-516 Threaded Gauge Installation Instructions

Tipo de cilindro Cilindrada Diámetro de la capacidad Calibre con esfera atornillada Medidor con Dial Snap-on Longitud de soporte Longitud de flotador
Universal 20 # [9 kg] 12 "ID. [305] 7384-01005 7384-02004 7-1/8 "[181] 5-1/4 "[133]
33-1/2 # [15 kg] 7384-01006 7384-02005 12-5/16 "[313]
43-1/2 # [20 kg] 7384-01007 7384-02006 19-1/4 "[489]
Vertical 14 # [6, 4 kg] 9 "ID. [229] 7381-01003 7381-02205 10-3/4 "[273] 4 "[102]
20 # [9 kg] 12 "ID. [305] 7381-01002 7381-02206 7-5/16 "[186] 6-7/16 "[163]
Horizontal 20 # [9 kg] 7384-01028 5 "[127]
33-1/2 # [15 kg]
43-1/2 # [20 kg]
60 # [27 kg]
60 # [27 kg] 14-1/2 "ID. [368] 7384-01029 8-1/2 "[216] 7-3/4 "[197]
100 # [45 kg]

Especificaciones generales *

Temperature
Standard range is -40°F to 158°F, -40°C to 70°C.

Shock
Designed for lift truck and portable cylinder service applications.

Vibration
Designed for lift truck and portable cylinder service applications.

Working Pressure
375 psig [25,8 Bar]

Approvals
UL listed for LP Gas service applications.

Al ordenar especifique:

1. For standard gauges, use the part number from the lift truck gauge selection chart.
2. For non-standard gauges, state the cylinder type (horizontal or vertical), capacity, diameter, height, mounting location, offset, and furnish tank drawings whenever possible.
3. Furnish riser or recess dimensions if applicable.

Para pedir un medidor de repuesto, simplemente proporcione la información estampada en una de las secciones planas en el lado del cabezal del medidor como se muestra en el ejemplo siguiente.

Materiales de construcción *

Head
Zinc die casting.

Centershaft Bearings, Gears, & Dial Mounting Screws
Stainless steel.

Support, Centershaft & Float Rod
Tempered aluminum.

Gear Housing
Acetal.

Float Bulb
Nitrile rubber.

Counterweight
Lead.

Magnet
Alnico.

Direct Reading Dials
Ultrasonically welded, hermetically sealed polycarbonate.

* Los materiales y especificaciones están sujetos a cambios sin previo aviso. Las clasificaciones de presión están sujetas a cambios debido a la temperatura y otras consideraciones medioambientales.

Consulta del producto-7300

    Productos relacionados

    Revisado 09-21-2015