6500 series Gauge
4 calibre de perno con flotador ajustable para tanques de baja presión (0 – 25 PSIG)
Application
The 6500 Series Senior gauges are designed for use in low pressure tanks 0-25 psig [0-1,7Bar] containing diesel fuel, gasoline, fuel oil and lubricating oils.
Se utiliza en muchas aplicaciones como equipos de construcción, generadores estacionarios, embarcaciones, equipos agrícolas y calefacción doméstica.
General Information & Features
The 6500 Series Adjustable Senior gauges are available in gear-action models for top mounting.
El flotador estándar es caucho de nitrilo. El medidor está montado en una brida Senior de acoplamiento 2 1 ⁄ 2 "círculo de perno [63, 5mm] con cuatro pernos largos de 1 ⁄ 4"-28 x 9 ⁄ 16 ". La Junta es Buna-N.
Top Mounting Adjustable Liquid-Level Gauges
| Número de modelo | Montaje | Datos del dial, del remitente o del interruptor | Longitud de soporte "S" |
|---|---|---|---|
| 6580-0151 | Arriba | #5002S01379 dial fraccional Senior de lectura directa | 3″ |
| 6540-00090 | #5880S02547P (0-90 ohmios) | 3″ | |
| 6540-00252 | #5AVHS03213P (240-30 ohmios) | 3-5/8 " |
Documents
Data Sheet
MS-501/502 Installation Instructions
DS-337 Cut-off Dimensions (available upon request)
Adapters 22 Series – Senior Sheet Steel
Adapters 22 Series – Senior Machined Steel
Adapters 22 Series – Senior Zinc
Especificaciones generales *
Accuracy
Accuracy depends upon proper gauge sizing. Senior dials ±7%, TwinSite dials ±12%. Accuracy may be less depending upon tank shape. Accuracy may be less near full and empty. Accuracy may be less if tank is not level. This gauge is not to be used for filling. All accuracy estimates are expressed as a percent of full scale.
Temperature
-40°F to 158°F, -40°C to 70°C.
Humidity
Point exposed portions of gauge, less dial, for marine applications.
Shock & Vibration
Suitable to mobile applications.
Power
0.5 watts maximum for TwinSite versions.
Tank Pressure
Up to 25 PSIG [1,7 Bar].
Approvals
These direct indicating gauges are UL listed for flammable liquids. Some modesl UL recognized for marine service.
Note: For installation instructions see MS-501/502 (mounting standard).
Al ordenar especifique:
1. Gauge model number.
2. Tank diameter and riser height.
3. Mounting location.
4. Ohm range on TwinSite® versions.
5. Preferred switch on switch gauges, if other than standard.
6. Any listed options or preferences.
Materiales de construcción *
Head
Die cast aluminum.
Centershaft, Support Tube & Float Rod
Tempered aluminum.
Gears, Cross Stud & Bearing
Stainless steel.
Drive Magnet
Alnico.
Gear Housing
Acetal plastic or Aluminum.
Float
Nitrile rubber.
Gasket
Buna-N, 0015-00004 or 0015-00079.
Direct Reading Dial
Aluminum with acrylic crystal, hermetically sealed.
Side Reading Dial
Aluminum with polycarbonate crystal, hermetically sealed.
TwinSite Sender
Polyamide.
Mounting Bolts
Zinc-plated steel 1/4″-28 x 9/16″ long.
* Los materiales y especificaciones están sujetos a cambios sin previo aviso. Las clasificaciones de presión están sujetas a cambios debido a la temperatura y otras consideraciones medioambientales.
Consulta del producto-6500 ajustable
Productos relacionados
WARNING: Acrylonitrile, BPA - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
