6700 series Gauge
5 calibre de perno para tanques de gasolina o diésel
Application
Measures gasoline or diesel fuel levels in tanks on trucks, boats, generators, recreational vehicles, and other applications.
General Information & Features
These top mounting magnetic liquid-level gauges are built to the high standards of all Rochester designed instruments. The construction permits the replacement of dials when necessary without releasing fumes or liquid to the atmosphere.
Ambos diales disponibles son fraccionados y con amortiguación de silicona, y se reemplazan fácilmente quitando y reinstalando dos tornillos. La robusta unidad de engranajes de Rochester incorpora engranajes biselados de acero inoxidable y cubiertos, diseñados para hacer funcionar cualquier partícula suelta que pueda afectar la función del engranaje. El sellado entre el medidor y el tanque se logra mediante el uso de la Junta 0015-00423 Buna-N.
| Número de modelo | Imán | Diales disponibles |
|---|---|---|
| 6741 | Gran Alnico | Direct-reading dial or TwinSite® sender. Choice of 0-30, 0-90, 240-30 Ohms |
| 6781 | El pequeño Alnico | Dial de lectura directa solamente. |
Documents
Data Sheet
Installation Instructions MS-532
Especificaciones generales *
Mounting
Recommended for top-mounting only.
Accuracy
Accuracy depends upon proper gauge sizing. Junior dials ±6%, TwinSite® dials ±10%. Accuracy may be less depending upon tank shape. Accuracy may be less near full and empty. Accuracy may be less if tank is not level. This gauge is not to be used for filling. All accuracy estimates are expressed as a percent of full scale.
Temperature
-40°F to 158°F, -40°C to 70°C.
Humidity
For high humidity and marine applications, painting of gauge, less dial, is recommended.
Shock & Vibration
Suitable to mobile applications.
Power
0.5 watts maximum for TwinSite® versions.
Tank Pressure
0 to 10 PSIG [0 to 0,68 Bar].
Approvals
Some models are UL recognized for marine service. Some models are UL listed for flammable fluids. Passes BIA fire test.
Note: For Installation Instructions see MS-532.
* Los materiales y especificaciones están sujetos a cambios sin previo aviso. Las clasificaciones de presión están sujetas a cambios debido a la temperatura y otras consideraciones medioambientales.
Materiales de construcción *
Head
Die cast aluminum with standard SAE gasoline gauge flange (2-1/8″ [54 mm] bolt circle fop 5 #10 screws. Screws not furnished.)
Centershaft, Support Tube & Float Rod
Tempered aluminum.
Gears, Cross Stud & Bearing
Stainless steel.
Drive Magnet
Alnico.
Gear Housing
Acetal plastic or aluminum.
Float
Nitrile rubber.
Gasket
Buna-N, 0015-00423.
Direct Reading Dial
Hermetically sealed polycarbonate.
TwinSite® Sender
Polyamide.
Al ordenar especifique:
1. Gauge model number.
2. Tank depth.
3. Float orientation, 3 o’clock standard.
4. Details on any optional features.
Consulta del producto-6700
Productos relacionados
WARNING: Acrylonitrile, BPA - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
