9371
Transmisor de montaje superior para tanques de combustible de aluminio, plástico o acero inoxidable de 4 "-24" en profundidad
La línea de emisores de combustible Reed array se ajusta a profundidades de tanque de 4 "[101,6 mm] a 24" [609,6 mm]. El emisor está diseñado para un montaje superior en tanques de combustible de aluminio, plástico o acero inoxidable en todo tipo de aplicaciones. Incluye características especiales y protección contra la corrosión (interna y externa al depósito de combustible), lo que los convierte en el estándar de calidad para la industria marítima.
General Information & Features
The Reed Array Sender comes standard with a SAE 5 hole mounting bolt pattern with the lead hole at 12:00 and the float arm at 3:00. The head and support are molded from UV stabilized Acetal and is suitable for medium-duty off-road conditions. The electrical circuit is sealed to protect components from fuel, contaminants, water and the molding-curing process (out-gassing). This Reed Array Sender offers dependable, long-lasting Reed Switch and magnet technology. The sender is suitable for gasoline, ethanol, diesel, bio-diesel and non-potable water.
Producción estándar de la industria: 240-30 ohmios. Las tolerancias estrechas mantenidas en esta serie de transmisor de nivel de combustible Reed array proporcionarán la señal adecuada para cualquiera de los populares receptores montados en panel de 2 "[50,8 mm].
Garantía limitada de tres años.
Documents
Data Sheet
Especificaciones generales *
Mounting
Recommended for top-mounting only.
Accuracy
System accuracy depends upon proper sender sizing. Resistance values are 30 ohms ±2% at full and 240 ohms ±2% at empty. System accuracy may depend upon tank shape. System accuracy may be less near full and empty. System accuracy may be less if tank is not level. System accuracy may be less depending upon indicator. This sender is not to be used for filling.
Temperature
-40°F to 176°F, -40°C to 85°C.
Power
0.5 watts maximum.
Leak Test
Passes 16 psig [1,1 Bar] test.
Fuel Sender Testing
Meets requirements of ISO 10088, ABYC H-24, 33 CFR 183.590 and ISO 8846. Industry test requirements were conducted at an independent laboratory.
Dry Bench Cycling – Empty to Full
5,000,000 cycles.
Vibration Test
6 hours each plane, 4.2 Gms, 24-2,000 Hz.
Shock Test
1,000 cycles @ 25G peak acceleration with 8ms duration.
Fire Test
No loss of gasket seal during 2-1/2 minute fire test.
Ignition Protection Test
50 empty to full to empty cycles in explosive atmosphere without ignition.
Wire Pull Test
10 lbs. without damage.
U.S. Patents
9,116,030; 8,567,244; D668572
Materiales de construcción *
Head, & Cover
UV stabilized Acetal.
Body & Pivot
UV stabilized Acetal.
Float
Nitrile rubber.
Material Compliance
RoHS compliant.
Float Rod
Stainless steel.
Eyelet
Stainless steel.
Arnés de cableado
18 awg. wires
Black & red PVC insulation.
Optional mounting gasket: Nitrile or Vitron – Please specify.
Salida de resistencia opcional
0-180 ohmios – norma europea.
*Materials and specifications are subject to change without notice.
Consulta del producto-9371
Productos relacionados
-
6700 ajustable
5 calibre de perno con flotador ajustable para gasolina o tanques de combustible diesel -
9800 industrial
Industrial Top Mount Reed interruptor sonda para aluminio, plástico, acero, o tanques de combustible inoxidable 4 "-42" Deep -
9830
Sonda de interruptor Reed industrial de montaje superior con recogida y retorno para tanques de combustible de aluminio, plástico, acero o inoxidable 10 "-30" Deep -
9800 Marine
Marine Top Mount Reed interruptor sonda para aluminio, plástico, acero, o tanques de combustible inoxidable 4 "-42" Deep -
6700
5 calibre de perno para tanques de gasolina o diésel
WARNING: Acrylonitrile, BPA - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
