Consent Preferences

9800 Industrial

Industrial Top Mount Reed Switch Probe for Aluminum, Plastic, Steel, or Stainless Fuel Tanks 4” - 42” Deep

The Reed Switch line of fuel senders fit tanks 4” [101.6 mm] to 42” [1067 mm]. They are designed for top mounting in aluminum, plastic, steel or stainless steel fuel tanks in all types of industrial equipment. These senders are recommended for both on-road and off-road applications. They include special features and protection from corrosion (internal and external to the fuel tank) which makes them the quality standard for all industries.

General Information & Features
Standard mounting configuration, SAE 5 hole bolt pattern. The head and support are made of stainless steel and is suitable for harsh off-road conditions. The sender is suitable for gasoline, ethanol, diesel, bio-diesel, urea and water.

Industry standard output: 240-30 ohms. The close tolerances held on this series of Reed Switch fuel level sender will provide the proper signal for any of the popular 2” [50.8 mm] panel mounted quality receivers or ECM’s.

Data Sheet
MS-514 Installation Instructions

General Specifications*

Designed for top mounting only.

System accuracy depends upon proper sender sizing. Resistance values are 30 ohms ±2% at full and 240 ohms ±2% at empty. System accuracy may depend upon tank shape. System accuracy may be less near full and empty. System accuracy may be less if tank is not level. System accuracy may be less depending upon indicator. This sender is not to be used for filling.

-40°F to 176°F, -40°C to 85°C.

0.5 watts maximum.

Leak Test
Passes 16 PSIG [1,1 BAR] test.

Gasoline Rocker Test
3,000,000 cycles.

Thermal Shock/Hot Dunk Test
10 cycles in air, +85°C to immersion in room temperature saline.

Dry Bench Cycling
25,000,000 cycles.

Vibration Test
6 hours each plane, 9.9 Grms, 24-2,000 Hz.

Salt Spray Test
96 hours external as mounted.

Drop Test
1.2m onto concrete from each orientation.

Power Wash Test
50 cycles, 3,000 psi, 2.7 gal./minute.

Lead Pull Test
20 lbs. harness, 10 lbs. each wire.

Materials of Construction*

Stainless steel.

Stainless steel.

Nitrile rubber.

Material Compliance
RoHS Compliant.

Wiring Harness

18 awg. wires.
Black & white PVC insulation.
Black overmolding PVC jacket.
Optional mounting gasket: Nitrile or Viton -please specify.

*Materials and specifications are subject to change without notice.

Product Inquiry - 9800 Industrial

    Related Products

    Revised 09-07-2017