9815 Industrial Sender
Industrial Reed Switch Fuel Level Sender
The Reed Switch line of fuel senders fit tanks 4” [101.6 mm] to 42” [1067 mm]. They are designed for top mounting in aluminum, plastic, steel or stainless steel fuel tanks in all types of industrial equipment. These senders are recommended for both on-road and off-road applications. They include special features and protection from corrosion (internal and external to the fuel tank) which makes them the quality standard for all industries.
General Information & Features
Standard mounting configuration, 1 ½” NPTF.
The head and support are made of stainless steel and is suitable for harsh offroad conditions.
The sender is suitable for gasoline, ethanol, diesel, bio-diesel, urea and water. Industry standard output: 240-30 ohms.
The close tolerances held on this series of Reed Switch fuel level sender will provide the proper signal for any of the popular 2” [50.8 mm] panel mounted receivers or ECM’s.
Designed for top mounting only.
System accuracy depends upon proper sender sizing. Resistance values are 30 ohms +/-2% at full and 240 ohms +/-2% at empty. System accuracy may depend upon tank shape. System accuracy may be less near full and empty. System accuracy may be less if tank is not level. System accuracy may be less depending upon indicator. This sender is not to be used for filling.
-40°F to 176°F, -40°C to 85°C
0.5 Watts maximum.
Passes 16 PSIG [1,1 Bar] test.
Thermal Shock/Hot Dunk Test
10 cycles in air, +85°C to immersion in Room Temperature Saline
Dry Bench Cycling
6 hours each plane, 9.9 Grms, 24-2,000 Hz.
Salt Spray Test
96 hours external as mounted.
1.2m onto concrete from each orientation.
Power Wash Test
50 cycles, 3,000 psi, 2.7 gal./minute.
Lead Pull Test
20 lbs. harness, 10 lbs. each wire.
Materials of Construction*
18 awg. wires.
Black & white PVC insulation.
Black overmolding PVC jacket.
*Materials and specifications are subject to change without notice.
Product Inquiry - 9815
9800 MarineMarine Top Mount Reed Switch Probe for Aluminum, Plastic, Steel, or Stainless Fuel Tanks 4” - 42” Deep
67005 Bolt Gauge for Gasoline or Diesel Fuel Tanks
9371Top Mount Sender for Aluminum, Plastic, or Stainless Steel Fuel Tanks from 4” - 24” in Depth
9830Industrial Top Mount Reed Switch Probe with Pickup & Return for Aluminum, Plastic, Steel or Stainless Fuel Tanks 10” - 30” Deep
6700 Adjustable5 Bolt Gauge with Adjustable Float for Gasoline or Diesel Fuel Tanks