9840
RUGGED PLASTIC PUSH-IN REED SWITCH PROBE SENSOR FOR ROTOMOLDED TANKS
The 9840 push-in reed switch probe (RSP) sensor provides a fast installation option for rotomolded tanks. The level sensor snaps into a rotomolded tank without requiring the SAE mounting adapter and bolts. This simplifies installation and reduces the cost of tanks. Nylon construction provides a lightweight, durable sensor. A grommet provides a seal at the tank interface. The sensor has an industry standard output of 240 to 30 ohms and can be customized to meet specific application needs. The device is press-fit into a tank opening and features ribs to ensure a snug fit around the sealing area.
General Information and Features
- Nylon housing offers excellent mechanical properties and chemical resistance
- Ingress Protection: IP67 rated
Key Benefits
- Snap fit into tank – works with plastic rotomolded tanks
- Compatible with existing RSP technology to simplify integration into ECU and sensors
Tank Opening
- Recommended tank hole size 1.486″ ± 0.020″ [37.75mm ± 0.50mm
- The hole size may need to be increased or decreased depending on the tank wall thickness and manufacturing
process
Documents
Data Sheet
Configurator Sheet
An optional connector is shown in the illustration below. The default configuration is 12” flying leads.
Ordering Information
| 9840-UULLLG-CC |
| UU represents ullage in 0.1” increments from 1.5” to 9.9”. Standard ullage is 1.5” |
| LLL represents overall length in 0.1” increments from 4.0” to 20.0” |
| G is the gasket selection, N Nitrile (standard) or V Viton |
| CC is an optional connector * Blank – flying leads with 12” cable length * X1 – Deutsch DTM04-2P connector with 6” cable length |
| Other connector options available on request |
Electrical Interface
Cable Pinout
| Pin 1. Signal – White |
| Pin 2. Ground – Black |
Environmental Ratings
Durability
Product Inquiry - 9840
WARNING: Acrylonitrile, BPA - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
