F7384
¾” NPTF Bulls Eye Gauge for Monitoring High, Normal and Low Liquid Levels for Crankcase & Lubrication Systems
Application
The F7384 Bulls Eye Gauge is a 3/4″ NPTF lever type gauge designed for use in monitoring liquid levels at High, Normal, and Low. It is used on crankcase and lubrication systems to provide level readings ensuring sufficient oil levels are maintained at all times
General Information & Features
The F7384 Bulls Eye Gauge provides the same range of readings as a glass sight tube (2 connections required) with only one connection required on the tank.
Documents
Data Sheet
MS-516 Installation Instructions
Gauge Mounting Dimensions
General Specifications*
Mounting
Designed for side mounting only.
Temperature Range
Standard operating range -40°F to 158°F, -40°C to 70°C. At 150°F (49°C) air temperature, maximum temperature is 250°F (120°C).
Working Pressure
375 psig [25,8 Bar] with Zinc Head; 440 psig [30 bar] with Brass Head.
When Ordering Specify:
Measurement span (distance from top to bottom of green zone in tank).
Materials of Construction*
Head
Die cast zinc. (Also available in brass.)
Seal
Thread sealant.
Guide Tube
Aluminum.
Centershaft
Aluminum.
Bearings
Stainless steel.
Float
Aluminum. (Also available in nitrile rubber.)
Drive Magnet
Alnico.
Standard Dial
Ultrasonically welded, hermetically sealed polycarbonate. (Custom dial graphics optional.)
*Materials and specifications are subject to change without notice. Pressure ratings subject to change due to temperature and other environmental considerations.
Product Inquiry - F7384
Related Products
WARNING: Acrylonitrile, BPA - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
