8700系列量具
用于低压、非加热系统的可调节浮子的乙酰5螺栓测量仪
Application
The 8700 series gauges are used to measure water levels in all types of low-pressure, non-heated systems. Ideal for boats, recreational vehicles, campers, etc. NOTE: For hot or pressurized water service, see 8400 Series.
General Information & Features
The magnetic construction permits the complete sealing off of the inside liquid from the outside gauge head and dial allowing quick dial replacement without the loss of liquid or time.
表盘指针是硅阻尼的。所有拨号、发送器和开关都可立即更换-只有两个螺钉可拆卸和更换。
坚固的齿轮传动是标准的裹尸布, 不锈钢, 斜面齿轮, 旨在脱落和计算出任何松散的颗粒, 可能会干扰齿轮的作用。所有材料都经过选择, 可在水表应用中提供出色的耐久性。
这些水表仅适用于顶部安装。他们配备了浮臂, 这些武器将被切断到安装到坦克的适当长度。DS-337 数据表提供了正确的切割长度和如何安装浮子并将其卷曲到位的说明。
这个仪表有一个5螺栓 SAE 模式法兰连接到坦克与五个 #10 螺丝通过一个 Buna-N 垫片, #0015-00423。
| 型号 | 磁铁 | 可用的拨号 |
|---|---|---|
| 8741 | 大型阿尔尼科 | Direct-reading dial or TwinSite® sender. Choice of 0-90, 240-30 Ohms |
| 8781 | 小阿尔尼科 | 仅限直接阅读拨号。 |
Model Selection Chart
| 型号 | 安装 | 拨号、发件人或交换机数据 |
|---|---|---|
| 8741-008 | 20.5 英寸 [520] | 5323S01834 direct-read P5744S02541 TwinSite® sender, 240-30 Ohms. |
| 8741-00020 | 26英寸 [660] |
Documents
Data Sheet
MS-533 Installation Instructions
| 英寸内的储罐深度 | 从浮子弯道到浮子杆截止点的距离 |
|---|---|
| 6 | 3″ |
| 7 | 3---" |
| 8 | 4-5 " |
| 9 | 5-5 " |
| 10 | 6-5 " |
| 11 | 7-5 " |
| 12 | 8-5 " |
| 13 | 9-" |
| 14 | 10-" |
| 15 | 11-" |
| 16 | 12-" |
| 17 | 13-" |
| 18 | 14-7/8 " |
| 19 | 15-7/8 " |
| 20 | 16-7/8 " |
| 21 | 17-7/8 " |
| 英寸内的储罐深度 | 从浮子弯道到浮子杆截止点的距离 |
|---|---|
| 22 | 18-7 " |
| 23 | 20″ |
| 24 | 21″ |
| 25 | 22″ |
| 26 | 23″ |
| 27 | 24″ |
| 28 | 25 " |
| 29 | 26-半 " |
| 30 | 27-5 " |
| 31 | 28 " |
| 32 | 29----1 " |
| 33 | 30-5 " |
| 34 | 31--" |
| 35 | 32-5 " |
| 36 | 33-5 " |
一般规格 *
Mounting
Recommended for top-mounting only.
Accuracy
Accuracy depends upon proper gauge sizing. Junior dials ±7%, TwinSite® dials ±12%. Accuracy may be less depending upon tank shape. Accuracy may be less near full and empty. Accuracy may be less if tank is not level. This gauge is not to be used for filling. All accuracy estimates are expressed as a percent of full scale.
Temperature
Standard range is -40°F to 158°F, -40°C to 70°C.
Shock & Vibration
Suitable to mobile applications.
Power
0.5 watts maximum for TwinSite® versions.
Tank Pressure
0 to 10 PSIG [0 to 0,68 Bar].
Approvals
UL recognized for marine water service.
Note: Installation Instructions MS-533.
* 材料和规格如有更改, 恕不另行通知。压力额定值可能会因温度和其他环境因素而发生变化。
建筑材料 *
Head
Lightweight injection molded polyester SAE gasoline gauge flange (2-1/8″ [54] bolt circle for five #10 screws not furnished).
Centershaft, Support Tube & Float Rod
Brass.
Gears, Cross Stud & Bearing
Stainless steel.
Drive Magnet
Plated Alnico.
Gear Housing
Acetal.
Float
Nitrile rubber.
Gasket
Buna-N, 0015-00423.
Direct Reading Dial
Hermetically sealed polycarbonate.
TwinSite® Sender
Polyamide.
Dial Screws
Plastite 0040-00479.
订购时指定:
1. Gauge model number.
2. Choice of dials.
产品查询-8700 可调
相关产品
WARNING: Acrylonitrile, BPA - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
