9800工业
工业簧片开关燃油级发送器
Application
The 9800 series of reed switch probe (RSP) senders is designed for top mounting in aluminum, plastic, steel or stainless-steel fuel tanks in all types of industrial equipment. These senders are recommended for both on-road and off-road applications. They include special features and protection from corrosion (internal and external to the fuel tank) which makes them the quality standard for all industries.
General Information & Features
The head and support are made of stainless steel and is suitable for harsh off-road conditions. The sender is suitable for gasoline, ethanol, diesel, bio-diesel, urea and water. Standard mounting configuration, SAE 5-hole bolt pattern. Also available 4-bolt or 6-bolt mount head.
Industry standard output: 240 (empty) – 30 (full) ohms. The close tolerances held on this series of Reed Switch fuel level sender will provide the proper signal for any of the popular 2” [50.8 mm] panel mounted quality receivers or ECM’s.
9800-0800 series provide 0.5-5.0V output. Other voltage output ranges can be made available.
Documents
Data Sheet
MS-514 Installation Instructions
*9800 series also available with 4-bolt or 6-bolt head. For other mounting options, see 9815 series for 1.5″ NPT and 9840 series for press-fit.
一般规格
Mounting
Designed for top mounting only.
Accuracy
System accuracy depends upon proper sender sizing. Resistance values are 30 ohms ±2% at full and 240 ohms ±2% at empty. System accuracy may depend upon tank shape. System accuracy may be less near full and empty. System accuracy may be less if tank is not level. System accuracy may be less depending upon indicator. This sender is not to be used for filling.
Temperature
-40°F to 257°F, -40°C to 125°C.
Power
0.5 watts maximum.
Leak Test
Passes 16 PSIG [1,1 BAR] test.
Gasoline Rocker Test
3,000,000 cycles.
Thermal Shock/Hot Dunk Test
10 cycles in air, +85°C to immersion in room temperature saline.
Dry Bench Cycling
25,000,000 cycles.
Vibration Test
6 hours each plane, 9.9 Grms, 24-2,000 Hz.
Salt Spray Test
96 hours external as mounted.
Drop Test
1.2m onto concrete from each orientation.
Power Wash Test
50 cycles, 3,000 psi, 2.7 gal./minute.
Lead Pull Test
20 lbs. harness, 10 lbs. each wire.
建筑材料 *
Head
Stainless steel.
Support
Stainless steel.
Seal
Buna nitrile rubber or optional viton/FKM.
Float
Nitrile rubber.
Material Compliance
RoHS Compliant.
线束
18 awg. wires.
Black & white PVC insulation.
Black overmolding PVC jacket.
Optional mounting gasket: Nitrile or Viton -please specify.
*Materials and specifications are subject to change without notice.
产品查询-9800 工业
相关产品
WARNING: Acrylonitrile, BPA - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
