Serie 8500
Medidor de tornillo acetil 4 para tanques de temperatura ambiente de baja presión
Application
The 8500 Series Senior gauges are specially designed for low-pressure, ambient temperature use in potable water tanks and holding tanks for gray or waste water on boats and recreational vehicles. Aircraft de-icing liquids and ethylene glycol/water mixtures in radiators have been successfully measured with these gauges.
General Information & Features
The 8500 Series gauges are available in gear-action models for top, centerline or angle mounting or in lever-action models for centerline mounting only.
El flotador estándar es caucho de nitrilo. También se dispone de polipropileno (aprobado por la FDA para el servicio de agua potable) y flotadores de acero inoxidable. Por favor, especifique su elección. El medidor está unido a una brida Senior con 2 1 ⁄ 2 "círculo de perno a través del uso de cuatro, 1 ⁄ 4" – 28 x 9 ⁄ 16 "pernos largos. La Junta es Buna-N.
Documents
Data Sheet
Installation Instructions — MS-530
Adapters 22 Series – Senior Stamped Brass
| Número de modelo | Acción | Montaje | Datos del dial, del remitente o del interruptor |
|---|---|---|---|
| 8540 | Engranaje | Arriba | Senior TwinSite® Sender en la elección de 0-30, 0-90, o 240-30 Ohm rangos. También se pueden utilizar diales fraccionales de lectura directa. |
| 8543 | C/L o ángulo | ||
| 8550 | Arriba | Senior S.P.S.T. 1/2 Amp, standard. Many other switches available, see DS-364. | |
| 8553 | C/L o ángulo | ||
| 8560 | Arriba | Dial fraccional de lectura lateral Senior. | |
| 8580 | #5002S00062 lectura directa Senior. | ||
| 8583 | C/L o ángulo | ||
| L8543 | Palanca | C/L | #5141S00570 lectura directa Senior. |
| L8553 | Senior S.P.S.T. 1/2 Amp, standard. Many other switches available, see DS-364. | ||
| L8583 | #5002S00547 lectura directa Senior. |
Especificaciones generales *
Dial Data
Dials & senders are hermetically sealed & tested in 8″ Hg vacuum.
Accuracy
Accuracy depends upon proper gauge sizing. Senior dials ±6%, TwinSite® dials ±10%. Accuracy may be less depending upon tank shape. Accuracy may be less near full and empty. Accuracy may be less if tank is not level. This gauge is not to be used for filling. All accuracy estimates are expressed as a percent of full scale.
Temperature Range
Standard is -40°F to 158°F, -40°C to 70°C.
Humidity
Exposed portion is suitable for high humidity and marine applications.
Shock
Suitable for mobile applications.
Vibration
Suitable for mobile applications.
Power
0.5 watts maximum for TwinSite® versions.
Tank Pressure
0 to 25 psig [0 to 1,7 Bar]
Approvals
Some models are UL recognized for marine water service.
Note: For installation instructions see MS-501/502 (mounting standards).
Materiales de construcción *
Head
Injection-molded polyester plastic.
Gear Housing or Stop Adapter
Injection-molded acetal plastic.
Centershaft, Support Tube & Float Rod
Brass.
Gears, Cross Stud, & Bearings
Stainless steel.
Float
Nitrile Rubber.
Gasket
Buna-N, 0015-00004 or 0015-00079.
Drive Magnet
Plated Alnico.
Direct-Reading Dial
Aluminum with acrylic crystal.
Side-Reading Dial
Aluminum with Lexan crystal.
TwinSite® Sender
Polyamide.
Mounting Bolts
Zinc-plated steel, stainless steel optional.
Al ordenar especifique:
1. Gauge model number.
2. Tank diameter and riser height.
3. Mounting location.
4. Any listed options.
* Los materiales y especificaciones están sujetos a cambios sin previo aviso. Las clasificaciones de presión están sujetas a cambios debido a la temperatura y otras consideraciones medioambientales.
Consulta del producto-8500
Productos relacionados
WARNING: Acrylonitrile, BPA - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
