Consent Preferences

8400 series

Latón de 4 pernos para servicio de agua caliente y/o presurizada

The 8400 Series Senior gauges were specially designed for hot and/or pressurized-water service on dishwashers, boilers, engine radiators, marine vessels (water or fuel), and fire trucks.

General Information & Features

The 8400 Series gauges are available in gear-action models for top, centerline or angle mounting. Lever-action models are available for centerline mounting.

Estos medidores se montan mediante el uso de cuatro #0040-00424 pernos, 5 ⁄ 16 "— 24 x 9 ⁄ 16", y un UL reconocido #0015-00004 Junta Buna-N. El flotador estándar es de acero inoxidable. Caucho de nitrilo o un flotador de polipropileno aprobado por la FDA también están disponibles. Para aplicaciones marinas, se deben utilizar pernos de montaje de acero inoxidable #0040-00478.

Data Sheet
MS-501/502 Installation Instructions
HM8443 Data Sheet for Refrigerant Service Applications
Adapters 22 Series – Senior Stamped Brass

Número de modelo Acción Montaje Datos del dial, del remitente o del interruptor
8450 Engranaje Arriba Standard switch #5023S00778 S.P.S.T. VAC/50 VDC 1/2 Amp. Please furnish tank drawings and switch points so proper gauge and calibration can be supplied. Other switches available, see DS-364.
8453 C/L o ángulo
L8453 Palanca C/L
8460 Engranaje Arriba #5097S00570 fracción de lectura lateral Senior.
8480 #5141S00062 fracción de lectura directa Senior.
8483 C/L o ángulo
L8483 Palanca C/L #5141S00872 fracción de lectura directa Senior.

Especificaciones generales *

Dial Data
Dials & senders are hermetically sealed & tested in 8″ Hg vacuum.

Accuracy depends upon proper gauge sizing and is typically ±6% of dial indication. Accuracy may be less for some tank shapes and sizes. Accuracy may be less near full and empty. Accuracy may be less if tank is not level. This gauge is not to be used for filling. All accuracy estimates are expressed as a percent of full scale.

Temperature Range
Standard is -40°F to 212°F, -40°C to 100°C with optional stainless steel mounting bolts which maybe required for temperatures below -20°F, -29°C. Higher ratings and special construction available for coolant service.

Exposed portion is suitable for high humidity and marine applications, if optional stainless steel mounting bolts are specified.

Suitable for mobile applications.

Suitable for mobile applications.

Tank Pressure
0 to 250 psig [0 to 17 Bar]

Some models are UL recognized for marine service applications.

Materiales de construcción *

Head, & Gear Housing
Brass forging.

Centershaft, Support Tube & Float Rod

Gears, Cross Stud, Float, & Bearings
Stainless steel.

Drive Magnet
Plated Alnico.

Drive Magnet
Buna-N, 0015-00004.

Direct-Reading Dial
Aluminum with acrylic crystal and brass bezel.

Side-Reading Dial
Aluminum with polycarbonate crystal and brass bezel.

Mounting Bolts
Zinc-plated steel. (Stainless steel optional.)

* Los materiales y especificaciones están sujetos a cambios sin previo aviso. Las clasificaciones de presión están sujetas a cambios debido a la temperatura y otras consideraciones medioambientales.

Al ordenar especifique:

1. Gauge model number.
2. Tank diameter and riser height.
3. Mounting location.
4. Any listed options.

Consulta del producto-8400

    Productos relacionados

    Revisado 05/22/2018