9815 Industrial Sender
Industrial Reed Switch Fuel Level Sender
Application
The 9815 Reed Switch line of fuel senders is designed for top mounting in aluminum, plastic, steel or stainless-steel fuel tanks in all types of industrial equipment. These senders are recommended for both on-road and off-road applications. They include special features and protection from corrosion (internal and external to the fuel tank) which makes them the quality standard for all industries.
General Information & Features
The head and support are made of stainless steel and is suitable for harsh offroad conditions. The sender is suitable for gasoline, ethanol, diesel, bio-diesel, urea and water. Standard mounting configuration, 1 ½” NPTF.
Industry standard output: 240 (empty) – 30 (full) ohms. The close tolerances held on this series of Reed Switch fuel level sender will provide the proper signal for any of the popular 2” [50.8 mm] panel mounted quality receivers or ECM’s.
Documents
Data Sheet
MS-514 Installation Instructions
General Specifications*
Mounting
Designed for top mounting only.
Accuracy
System accuracy depends upon proper sender sizing. Resistance values are 30 ohms +/-2% at full and 240 ohms +/-2% at empty. System accuracy may depend upon tank shape. System accuracy may be less near full and empty. System accuracy may be less if tank is not level. System accuracy may be less depending upon indicator. This sender is not to be used for filling.
Temperature
-40°F to 176°F, -40°C to 85°C
Power
0.5 Watts maximum.
Leak Test
Passes 16 PSIG [1,1 Bar] test.
Thermal Shock/Hot Dunk Test
10 cycles in air, +85°C to immersion in Room Temperature Saline
Dry Bench Cycling
25,000,000 cycles.
Vibration Test
6 hours each plane, 9.9 Grms, 24-2,000 Hz.
Salt Spray Test
96 hours external as mounted.
Drop Test
1.2m onto concrete from each orientation.
Power Wash Test
50 cycles, 3,000 psi, 2.7 gal./minute.
Lead Pull Test
20 lbs. harness, 10 lbs. each wire.
Materials of Construction*
Head
Stainless steel.
Support
Stainless steel.
Float
Nitrile rubber.
Material Compliance
RoHS Compliant.
Wiring Harness
18 awg. wires.
Black & white PVC insulation.
Black overmolding PVC jacket.
*Materials and specifications are subject to change without notice.
Product Inquiry - 9815
Related Products
-
9830
Tube-in-Head Reed Switch Probe with Fuel Pickup & Return -
6700 Adjustable
5 Bolt Gauge with Adjustable Float for Gasoline or Diesel Fuel Tanks -
9800 Marine
Marine Reed Switch Liquid Level Sender -
6700
5 Bolt Gauge for Gasoline or Diesel Fuel Tanks -
9371
Reed Switch Array Sender for 4”-24” Tank Depths
WARNING: Acrylonitrile, BPA - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
