9815 Industrial Sender
Industrial Reed Switch Fuel Level Sender
Application
The Reed Switch line of fuel senders fit tanks 4” [101.6 mm] to 42” [1067 mm]. They are designed for top mounting in aluminum, plastic, steel or stainless steel fuel tanks in all types of industrial equipment. These senders are recommended for both on-road and off-road applications. They include special features and protection from corrosion (internal and external to the fuel tank) which makes them the quality standard for all industries.
General Information & Features
Standard mounting configuration, 1 ½” NPTF.
The head and support are made of stainless steel and is suitable for harsh offroad conditions.
The sender is suitable for gasoline, ethanol, diesel, bio-diesel, urea and water. Industry standard output: 240-30 ohms.
The close tolerances held on this series of Reed Switch fuel level sender will provide the proper signal for any of the popular 2” [50.8 mm] panel mounted receivers or ECM’s.
Documents
Data Sheet
MS-514 Installation Instructions
Especificaciones generales *
Mounting
Designed for top mounting only.
Accuracy
System accuracy depends upon proper sender sizing. Resistance values are 30 ohms +/-2% at full and 240 ohms +/-2% at empty. System accuracy may depend upon tank shape. System accuracy may be less near full and empty. System accuracy may be less if tank is not level. System accuracy may be less depending upon indicator. This sender is not to be used for filling.
Temperature
-40°F to 176°F, -40°C to 85°C
Power
0.5 Watts maximum.
Leak Test
Passes 16 PSIG [1,1 Bar] test.
Thermal Shock/Hot Dunk Test
10 cycles in air, +85°C to immersion in Room Temperature Saline
Dry Bench Cycling
25,000,000 cycles.
Vibration Test
6 hours each plane, 9.9 Grms, 24-2,000 Hz.
Salt Spray Test
96 hours external as mounted.
Drop Test
1.2m onto concrete from each orientation.
Power Wash Test
50 cycles, 3,000 psi, 2.7 gal./minute.
Lead Pull Test
20 lbs. harness, 10 lbs. each wire.
Materiales de construcción *
Head
Stainless steel.
Support
Stainless steel.
Float
Nitrile rubber.
Material Compliance
RoHS Compliant.
Arnés de cableado
18 awg. wires.
Black & white PVC insulation.
Black overmolding PVC jacket.
*Materials and specifications are subject to change without notice.
Product Inquiry - 9815
Productos relacionados
-
9830
Sonda de interruptor Reed industrial de montaje superior con recogida y retorno para tanques de combustible de aluminio, plástico, acero o inoxidable 10 "-30" Deep -
9371
Transmisor de montaje superior para tanques de combustible de aluminio, plástico o acero inoxidable de 4 "-24" en profundidad -
6700 ajustable
5 calibre de perno con flotador ajustable para gasolina o tanques de combustible diesel -
9800 Marine
Marine Top Mount Reed interruptor sonda para aluminio, plástico, acero, o tanques de combustible inoxidable 4 "-42" Deep -
6700
5 calibre de perno para tanques de gasolina o diésel